SD Card Recovery ----How to Recover Lost Files from SD Card?: August 2016

Thursday, 25 August 2016

[Solution] BSOD - Kernel_data_inpage_error 0x0000007a

BSOD - Kernel_data_inpage_error 0x0000007a

The rest of the error is (0xc0203764, 0xc000000E, 0x22605BEO, 0x80DD9000). Windows 7 and Quickbooks 2009 install updates automatically. No other software or hardware changes have been made recently. Had nothing on monitor, restarted (power off then on)
then computer ran chkdsk and started windows normally. Then crashed again, blue screen, errrors as stated. Started in safe mode, tried to run virus scan (Norton 360) but wouldn't start scan. HELP!!

Solutions to the Problem BSOD - Kernel_data_inpage_error 0x0000007a

Download SmartPCFixer to Fix It (Free)

Bug Check 0x7A: KERNEL_DATA_INPAGE_ERROR with errorSTATUS_NO_SUCH_DEVICE ( 0xc000000E).
Check the cables of your HDD.
Also check the HDD with a manufacture diagnostic tool.

"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Don't Download Malware

Where are you getting the download?

There are malicious people who download valid copies of a popular download, modify the file with malicious software, and then upload the file with the same name. Make sure you are downloading from the developer's web page or a reputable company.

Don't install download manager

Many sites suggest or require you to install an installer or a download manager before allowing you to download a program you may be interested in downloading. These tools almost always cause your computer more problems and may even have malware or other spyware. Avoid any site claiming anything must be installed first before you can continue with your download.

Avoid advertisements on download pages

To help make money and pay for the bandwidth costs of supplying free the software, the final download page may have ads. Watch out for anything that looks like advertisements on the download page. Many advertisers try to trick viewers into clicking an ad with phrases like "Download Now", "Start Download", or "Continue" and that ad may open a separate download.

Cancel or deny any automatic download

Some sites may automatically try start a download or give the appearance that something needs to be installed or updated before the site or video can be seen. Never accept or install anything from any site unless you know what is downloading.

Bookmark Icons Outside of Internet Explorer 8

Almost, or I should say most all of the bookmark icons that I have outside of Internet Explorer 8 do not have the right icon that would relate to the specific website.
In the browser all of the icons are correct it's outside of the browser like in the favorites
user folder and for example on the Links Toolbar if you choose to use that which I do use.
All of the icons were very stable until I backed them up for a format and reinstall (first one since Win7) and on the new install and this has happened before all of the icons are glitchy.

Anwsers to the Problem Bookmark Icons Outside of Internet Explorer 8

Download SmartPCFixer to Fix It (Free)

I followed these steps, now all of my IE bookmark icons are back to the way they should be thank you Kai Schatzl.
1.
Close all folder windows that are currently open.
2.
Launch Task Manager using the CTRL+SHIFT+ESC key sequence, or by runningtaskmgr.exe.
3.
In theProcess tab, right-click on the
Explorer.exe process and selectEnd Process.
4.
Click theEnd process button when asked for confirmation.
5.
From the File menu of Task Manager, selectNew Task (Run…)
6.
TypeCMD.EXE, and click OK
7.
In the Command Prompt window, type the commands one by one and press ENTER after each command:
CD /d %userprofile%\AppData\Local
DEL IconCache.db /a
EXIT
8.
In Task Manager, clickFile, select New Task (Run…)
9.
TypeEXPLORER.EXE, and click OK.

This is how you rebuild your entire computers icon cache.

Make Sure that your Computer Meets the System Requirements

This error can be due to some configuration requirements for you system. If your PC hardware is not up to par, then make sure you update where necessary before continuing:

Microsoft Windows Requirements :

1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
16 GB available hard disk space (32-bit) or 20 GB (64-bit)

Another Safe way to Fix the Problem: Bookmark Icons Outside of Internet Explorer 8:

How to Fix Bookmark Icons Outside of Internet Explorer 8 with SmartPCFixer?

1. Download SmartPCFixer. Install it on your system.

2. After the scan is done, you can see the errors and problems which need to be repaired.

3. The Fixing part is done, the speed of your computer will be much higher than before and the errors have been removed.

Fast Solution to Error: BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Can someone help me understand why I got a blue screen of death which produced the following DMP file:
http://cid-8f1981076fad9c80.skydrive.live.com/self.aspx/Minidumps/111009-11310-01.dmp

The BSOD occured after I started up my computer and typed in my password to login to my account.
It was maybe 3 seconds after logging in to reach BSOD.

I've had trouble trying to figure out how to use the Windows debugging tools on my own, and appreciate any help.

Thanks,
Matt

Anwsers to the Problem BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Download SmartPCFixer to Fix It (Free)

Also, try to update the video drivers.
You appear to have an Intel video driver installed (igdkmd64.sys - dated July 3/09) that you may be able to obtain an update for.

However the problem could be hardware.

Did you run the Windows Upgrade Advisor prior to installed Windows 7?

I would also suggest to try a "clean boot" and see if there is an improvement.

Also, how long have you had Windows 7 installed? Any issues previously?

Windows Recovery - Totally Fix All Errors including BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Click on the Start button on the Taskbar.
Type "System Restore" (without quotes) in the Search box and hit Enter or,
Click on System Restore (when you see System Restore pop up in the list of search results).
Make sure the "Recommended restore" radio button is checked on the restore utility window.
Click on Next and follow the instructions given.

Note: There is the option on the restore utility to select "Choose a different restore point". Unless you have a specific reason to select a different date and time than what Windows recommends, just select the recommended option stated in the steps above. If you choose to select another one, follow these steps:

Click on that desired date and time, and Windows 7 will perform a scan for any affected programs in that restore point.

Once completed, click Next and follow the instructions given.

Once you have selected the restore point, your system will start the restoring process, after which you will have to restart the system.

boots to black screen with blinking cursor

i tried to install a netgear and suddenly its not installed properly,because of my adapter that is not charging that cause to shut down unexpectedly..and just happened when i boot up my computer you cannot see anything only the mouse mointer,and i guess
my operating system is corrupt ..what should i do?

Anwsers to the Problem boots to black screen with blinking cursor

Download Error Fixer for Free Now

Using Windows troubleshooter:

Click on Search on Charm bar and type Troubleshooting. Click on the very first option.
A new window will open. Click View all from the left pane.
Scroll down to the bottom and click on Windows update.
Troubleshooter window for Windows update will pop up. Click on NEXT. It may ask you for administrative permission.
The troubleshooter will automatically detect problems and fix it.
Now, close this window and try download/install the app which was previously showing error.

Bluetrack wireless mouse stopped working?

I bought a microsoft wireless bluetrack mouse 2000, model:1416.
I have been using this mouse for about 3 months when all of a sudden my laptop wont detect the mouse anymore.
I've plugged in other USB wireless mouses (lazer), and my laptop can recognize
them and i am able to use it.
There is no damage to the USB or the bluetrack mouse.
I've also replaced the batteries and checked the mouse properties and it doesn't detect the mouse why?

Solutions to the Problem Bluetrack wireless mouse stopped working?

Download Error Fixer for Free Now

Hi.

You may try the following steps and check.
Method 1:
You may try to run the Hardware troubleshooter and check.
Hardware troubleshooter

Method 2:
You may refer to the following articles and check.
Troubleshoot response failures in wireless keyboard or mouse
Resolve Bluetooth mouse or keyboard failure to function

Also refer to the following link:
Troubleshooting Microsoft Hardware

Run CHKDSK to Fix Bluetrack wireless mouse stopped working?

Go to the Start button.
In the Search box, type "cmd" (without quotes) and press Enter.
At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
Reboot your computer.

An error might pop up:

"Access denied as you do not have significant privileges. You have to invoke this utility in elevated mode."

If you receive the above error message, it means you are not logged into you computer as an Administrator. If that's the case, follow these steps to run the command prompt in elevated mode:

Go to theStart button.
Go to "All Programs > Accessories" and right click on "Command Prompt".
Select "Run as Administrator".
In the Search box, type "cmd" (without quotes) and press Enter.
At the command prompt, type "chkdsk /r /f" (without quotes) and press Enter.
Reboot your computer.

Boot and freezing issues

I have been running Windows 7 HomePremium on my Sony Vaio E Series laptop without any issues for over 3 years.
However, recently I began experiencing many problems :-
1) It takes almost 10 min between the Vaio logo and the password request for login, meanwhile the "starting windows" logo appears.
2) Sometimes, after the "starting windows" logo disappears, and the blue screen appears, the following message is seen: "configuring wondows, please do not turn off your computer", after which it says "failure configuring windows updates, reverting
previous changes", and promptly restarts the system, after which (1) repeats, but this time the login page appears.
3) The system abruptly stops working and the display freezes, and the only way to get it running again is to force shut down by pressing the power button, after which (1) and (2) occur again.
These problems are extremely time wasting and annoying.
Also I have lost my progress on various documents due to the system's tendency to randomly freeze.
What is wrong with my computer system? I have McAfee and do not visit high risk sites.
What
steps Should I take?

Solutions to the Problem Boot and freezing issues

Download SmartPCFixer to Fix It (Free)

Hi Shreyas,

Perform the steps from the link mentioned below and see if it works.
Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows

Have a Nice day!

To check for Windows updates. Open Windows Update by clicking the Start button , clicking All Programs, and then clicking Windows Update. In the left pane, click Check for updates, and then wait while Windows looks for the latest updates for your computer. If any updates are found, click Install updates.

Install the latest updates for Windows and for the program displaying the error. Note that the update for the program might be listed as an optional update on the Windows Update page.

Open Windows Update by clicking the Start button Picture of the Start button. In the search box, type Update, and then, in the list of results, click Windows Update.

Another Safe way to Repair the Problem: Boot and freezing issues:

How to Fix Boot and freezing issues with SmartPCFixer?

1. Download Error Fixer. Install it on your system.

2. After the scan is finished, you can see the errors and problems which need to be fixed.

3. The Repair part is finished, the speed of your computer will be much higher than before and the errors have been removed. You can also use other functions in this software. Like dll downloading, junk file cleaning and print spooler error repair.

[Anwsered] Bluetooth Problem in windows8 pro

Bluetooth Problem in windows8 pro

I am using DELL Inspiron N4030 laptop. When i am goingto install my bluetooth driver i cant.
When i am trying to troubleshoot it shows me that it has blocked Broadcom corporation? And it dosen't show the driver in the disk manager.
It works properly with
windows 7.
What should i do?

Solutions to the Problem Bluetooth Problem in windows8 pro

Download Error Fixer for Free Now

Machine Throttling

Go to the Start button.
In the Search box, type "regedit" (without quotes) and press Enter.
Look for the following registry key: "HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\ SQMClient\Windows\DisabledSessions".
On the right window pane, delete the subkey: "Machine Throttling".
Reboot your computer.

c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014

After installing Kespersky Internet Security 2014 on my Notebook, when I ran the SCAN, the following message was displayed:
" c:\windows\SYSTEM32\sechost.dll is either not designed to run or it contains an error.
Try installing the program by using the original installation media or contact the vendor.
Please suggest the action in this regard.
Original title: c:\windows\SYSTEM32\sechost.dll

Keys to the Problem c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014

Download SmartPCFixer to Fix It (Free)

If you failed to fix it, another option is to call Microsoft and walk through the process with a technician. To do this, dial "1-800-936-5700". Explain the error that you received and the steps in the update process during which it was displayed. The technician will be able to walk through the steps from getting a new product key to finishing the installation.

Another Safe way to Repair the Problem: c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014:

How to Fix c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014 with SmartPCFixer?

1. Click the button to download Error Fixer . Install it on your system. Open it, and it will scan your computer. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be repaired.

3. When the Fixing part is done, your computer has been speeded up and the errors have been removed

How to Resolve - Brand new computer with BSOD's?

Brand new computer with BSOD's

Purchased brand new Alienware Mx14, after I entered my upgrade code for Windows Ultimate I started getting BSOD's for the first time in years.
I am new to trouble shooting these issues but I did look through my event log and it is FILLED with error after
error after error.
I will sift through them eventually but right now I need to try to figure out how to fix these BSOD's.
This is just one of the errors from the past four BSOD's in two days I got -

The computer has rebooted from a bugcheck.
The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050033, 0x00000000000406f8, 0xfffff80002e811d0).
A dump was saved in: C:\Windows\MEMORY.DMP.
Report Id: 041312-39546-01.

I am not exactly sure if this is all of the info I need to post to give you all a clear picture, but any help would be gladly accepted.

thank you all

Solutions to the Problem Brand new computer with BSOD's

Download SmartPCFixer for Free Now

Using Windows troubleshooter:

Click on Search on Charm bar and type Troubleshooting. Click on the very first option.
A new window will open. Click View all from the left pane.
Scroll down to the bottom and click on Windows update.
Troubleshooter window for Windows update will pop up. Click on NEXT. It may ask you for administrative permission.
The troubleshooter will automatically detect problems and fix it.
Now, close this window and try download/install the app which was previously showing error.

Thursday, 25 August 2016

BSOD - Kernel_data_inpage_error 0x0000007a

Solutions to the Problem BSOD - Kernel_data_inpage_error 0x0000007a

Don't Download Malware

Recommended Method to Fix the Problem: BSOD - Kernel_data_inpage_error 0x0000007a:

How to Fix BSOD - Kernel_data_inpage_error 0x0000007a with SmartPCFixer?

Bookmark Icons Outside of Internet Explorer 8

Anwsers to the Problem Bookmark Icons Outside of Internet Explorer 8

Make Sure that your Computer Meets the System Requirements

Another Safe way to Fix the Problem: Bookmark Icons Outside of Internet Explorer 8:

How to Fix Bookmark Icons Outside of Internet Explorer 8 with SmartPCFixer?

BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Anwsers to the Problem BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Windows Recovery - Totally Fix All Errors including BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13

Recommended Method to Repair the Problem: BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13:

How to Fix BSOD error; running Windows 7 RC (64-bit) on Dell Adamo 13 with SmartPCFixer?

boots to black screen with blinking cursor

Anwsers to the Problem boots to black screen with blinking cursor

Using Windows troubleshooter:

Recommended Method to Fix the Problem: boots to black screen with blinking cursor:

How to Fix boots to black screen with blinking cursor with SmartPCFixer?

Bluetrack wireless mouse stopped working?

Solutions to the Problem Bluetrack wireless mouse stopped working?

Run CHKDSK to Fix Bluetrack wireless mouse stopped working?

Recommended Method to Fix the Problem: Bluetrack wireless mouse stopped working?:

How to Fix Bluetrack wireless mouse stopped working? with SmartPCFixer?

Boot and freezing issues

Solutions to the Problem Boot and freezing issues

Another Safe way to Repair the Problem: Boot and freezing issues:

How to Fix Boot and freezing issues with SmartPCFixer?

Bluetooth Problem in windows8 pro

Solutions to the Problem Bluetooth Problem in windows8 pro

Recommended Method to Fix the Problem: Bluetooth Problem in windows8 pro:

How to Fix Bluetooth Problem in windows8 pro with SmartPCFixer?

c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014

Keys to the Problem c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014

Another Safe way to Repair the Problem: c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014:

How to Fix c:\windows\SYSTEM32\sechost.dll error appeared when I ran a scan using Kaspersky Internet Security 2014 with SmartPCFixer?

Brand new computer with BSOD's

Solutions to the Problem Brand new computer with BSOD's

Using Windows troubleshooter:

Recommended Method to Repair the Problem: Brand new computer with BSOD's:

How to Fix Brand new computer with BSOD's with SmartPCFixer?